Product Series

Mature product, reliable quality.

Home page

Product Series

- Contact Us

Phone: +86-10-62893032

E-mail: support@neutrontek.com

Company Address: No. 536, Huai Sha Road, Bohai Town, Huairou District, Beijing

R&D Center: 4th Floor, Yicheng International Center, Haidian District, Beijing

100 Mbps Desktop Model DNTS-2

DNTS-2 is a high-precision, high-capacity, high-quality NTP network time server featuring an embedded system, a hard‑drive‑free and fanless design, shock‑resistant construction, low heat generation, and exceptional system stability and reliability.

Keywords:

Industrial Control

32‑bit Dual‑Core CPU

High‑Quality NTP Network Time Server

Category:

NTP network time server

Download:

DNTS-2N_Time_Server_English.docx

Tel :

+86-10-62893032

For details, please contact Mr. Yu.

For more details, please contact Engineer Wen.

Product Features

Product Overview

Technical Specifications

Optional accessories

Product Features
Product Overview
Base parameter
Optional accessories

- Commodity name: 100 Mbps Desktop Model DNTS-2
DNTS-2 is a high-precision, high-capacity, high-quality NTP network time server featuring an embedded system, a hard‑drive‑free and fanless design, shock‑resistant construction, low heat generation, and exceptional system stability and reliability.

Product Features
High-precision, high-capacity, high-quality NTP network time server
Embedded system, featuring a hard-drive‑free and fanless design, shock‑resistant construction, low heat generation, and stable, reliable operation.
Industrial-grade embedded industrial control core board, with dual CPUs operating simultaneously; the 32-bit CPU is a dual-core processor, delivering significantly enhanced performance.
Device information can display status details such as GPS/BD, network, and the device’s operating system.
GPS/BD clock reference mode, Tier‑1 network time server
Supports one 10/100M Base-T Ethernet port.
High reliability, with an MTBF of 90,000 hours.
Supports the latest 50 log entries feature.
Supports Telnet and SNMP network management functions.
Product Overview

The network time server DNTS, developed by Beijing Zhongxinchuang Technology Co., Ltd., is a high-tech, intelligent, stand-alone, high-precision network time server based on the NTP/SNTP protocols. DNTS obtains standard clock signal information from GPS or BeiDou geostationary satellites and transmits this information across the network, enabling devices that require time signals—such as computers and controllers—to synchronize with the standard clock. When using both GPS and BeiDou receivers, a priority can be defined; by default, BeiDou takes precedence, with GPS serving as a backup. The DNTS‑2N desktop model transmits standard clock information over TCP/IP networks, and DNTS supports multiple popular time‑distribution protocols, including NTP and time/UDP, as well as Zhongxinchuang’s proprietary time‑broadcast data packets with configurable UDP ports. The port numbers for NTP and time/UDP are fixed at 123 and 37, respectively, as specified in RFC‑123 and RFC‑37. Additionally, DNTS supports the broadcast mode of the SNTP protocol.

Installing and using a network time server is extremely straightforward: simply connect the satellite receiving antenna, plug the network port into a network switch, and the entire network will be synchronized.

Technical Specifications

Supported protocols	ARP, IP, UDP, ICMP, SNMP, TCP, TFTP, NTP/SNTP, time/UDP
Network port	1 × 10/100M adaptive Ethernet port
Serial port	DB9 (male) RS-232/RS-422
Serial baud rate	9600,8,O,1,NMEA0183 output
Receiver	Built-in Beidou and Beidou satellite receiver, built-in crystal clock.
Time synchronization accuracy	1–10 milliseconds (depending on network load)
Protocol Compatibility	Ethernet V2.0/IEEE 802.3, Token Ring 802.2 LLC
Input power supply	+9V, approximately 200mA
Operating environment	0℃ to +50℃
Warranty	3 years

This is placeholder text.

Product Overview

The network time server DNTS, developed by Beijing Zhongxinchuang Technology Co., Ltd., is a high-tech, intelligent, stand-alone, high-precision network time server based on the NTP/SNTP protocols. DNTS obtains standard clock signal information from GPS or BeiDou geostationary satellites and transmits this information across the network, enabling devices that require time signals—such as computers and controllers—to synchronize with the standard clock. When using both GPS and BeiDou receivers, a priority can be defined; by default, BeiDou takes precedence, with GPS serving as a backup. The DNTS‑2N desktop model transmits standard clock information over TCP/IP networks, and DNTS supports multiple popular time‑distribution protocols, including NTP and time/UDP, as well as Zhongxinchuang’s proprietary time‑broadcast data packets with configurable UDP ports. The port numbers for NTP and time/UDP are fixed at 123 and 37, respectively, as specified in RFC‑123 and RFC‑37. Additionally, DNTS supports the broadcast mode of the SNTP protocol.

Installing and using a network time server is extremely straightforward: simply connect the satellite receiving antenna, plug the network port into a network switch, and the entire network will be synchronized.

This is placeholder text.

Technical Specifications

Supported protocols	ARP, IP, UDP, ICMP, SNMP, TCP, TFTP, NTP/SNTP, time/UDP
Network port	1 × 10/100M adaptive Ethernet port
Serial port	DB9 (male) RS-232/RS-422
Serial baud rate	9600,8,O,1,NMEA0183 output
Receiver	Built-in Beidou and Beidou satellite receiver, built-in crystal clock.
Time synchronization accuracy	1–10 milliseconds (depending on network load)
Protocol Compatibility	Ethernet V2.0/IEEE 802.3, Token Ring 802.2 LLC
Input power supply	+9V, approximately 200mA
Operating environment	0℃ to +50℃
Warranty	3 years